If your business in Preston uses gas for heating, hot water or production, someone has to keep that plant safe, legal and running. This guide explains what a commercial gas engineer actually does, what the law expects of you as the business, which paperwork you should hold, and how to plan the year so that gas work fits around your operation rather than interrupting it.SMR Gas Maintenance Ltd are industrial and commercial gas engineers based at Higher Walton, Preston. We have worked only on industrial and commercial gas since 1999 and we are Gas Safe registered (562186).
Commercial gas work covers far more than a wall-hung boiler. On a typical Preston industrial estate or business park, we might be looking after:
Each of these needs an engineer whose Gas Safe registration covers that type of appliance. A registration on its own is not enough. The engineer's ID card lists the categories they are qualified for, and those categories should match your plant.
The Gas Safety (Installation and Use) Regulations 1998 put a duty on employers to make sure gas appliances, installation pipework and flues at a place of work are maintained in a safe condition. Where equipment is used for work, the Provision and Use of Work Equipment Regulations 1998 (PUWER) also require it to be maintained. Steam boilers and other pressure systems come under the Pressure Systems Safety Regulations 2000 as well, which require a written scheme of examination.In practice, that means three things:
Commercial gas paperwork uses industry form numbers that can be confusing. The ones you are most likely to see are:
Keep them together with your asset list and any warning notices, so you can find them quickly when they are needed.
The businesses with the fewest breakdowns treat gas maintenance as a planned job, not a reaction to failure. A simple approach:
Larger sites, and businesses with more than one site, usually find that a planned preventative maintenance (PPM) contract makes this easier to manage.
If you smell gas or suspect a leak, turn off the gas supply at the emergency control valve if it is safe to do so, open doors and windows, stop anyone using electrical switches or naked flames, get people out, and call the National Gas Emergency Service on 0800 111 999. Once the supply has been made safe, a Gas Safe registered engineer has to find and repair the fault before the gas is turned back on. For commercial sites, our 24/7 emergency line is 07882 898492.
You need an engineer whose Gas Safe registration covers the appliances you have. Check the categories on their ID card, or check the business on the Gas Safe Register website.
Most commercial appliances are serviced at least once a year. Some process plant, and equipment that runs for long hours, may need more frequent visits. Follow the manufacturer's instructions and any conditions set by your insurer.
The law requires gas appliances, pipework and flues at work to be maintained in a safe condition. Certificates such as the CP17 are how you show that this has been done, and insurers commonly ask for them.
Yes. From Higher Walton we cover Lancashire, Greater Manchester, Merseyside and the wider North West.
If you want help listing your gas plant, sorting out your certificates or setting up a maintenance plan, get in touch.SMR Gas Maintenance Ltd
Unit 10 Higher Walton Mill, Cann Bridge Street, Higher Walton, Preston PR5 4DJ
📞 07882 898492 (24/7 commercial emergency call-out)
📧 andy@smrgasservices.co.uk
🌐 www.smrgas.co.uk
Gas Safe Register No. 562186. Industrial and commercial work only.